LOGIN  |  REGISTER
Smart Living Made Brilliant!
CASTLEOS FORUM

tal.winter@gmail.com

all messages by user

2/10/2016
Topic:
Set event between times

tal.winter@gmail.com
tal.winter@gmail.com
Hello.
i am trying to set an event with condition and time is between 6:30AM and 4:30PM.
As I see it, it means that between 6:30AM and 4:30PM the event will occur.
But when I write it like that it says that end time suppose to be after start time but it looks ok.
Maybe there is a problem with the text boxes order?

Thank you
2/14/2016
Topic:
Set event between times

tal.winter@gmail.com
tal.winter@gmail.com
Anyone? smile
2/16/2016
Topic:
Installing CastleOS

tal.winter@gmail.com
tal.winter@gmail.com
I am trying to install CastleOS from the web site but I get this error attached,
Any ideas?

Thank you
2/22/2016
Topic:
Installing CastleOS

tal.winter@gmail.com
tal.winter@gmail.com
Fixed it.
Just for the record, the installer was fine.
I deleted every trace of it in the registry and it's fine now.
2/22/2016
Topic:
Installing CastleOS

tal.winter@gmail.com
tal.winter@gmail.com
Crap. talked to soon.
The installer didn't ended well.
Same error and at the end i get: CastleOS Core Service setup ended prematurley.

So, what can i do?
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
Ok. Great. I will check it.

Thank you very much
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
Hello
Just checked it
No luck.
This is my devices list (or, well, where can i see lux, motion and other columns?)
Do i need to edit something to get those sensors?
nothing is working, no events, even no motion ..
update: when i check the status with Aeon Labs IMA tools, status of node, it says: listening false
Is it ok?
Thanks
edited by tal.winter@gmail.com on 2/23/2016
edited by tal.winter@gmail.com on 2/23/2016
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
And when i am trying to send mail, I get this error (in the logs): (using Gmail smtp)

System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed.
at System.Net.Mail.SmtpReplyReaderFactory.ProcessRead(Byte[] buffer, Int32 offset, Int32 read, Boolean readLine)
at System.Net.Mail.SmtpReplyReaderFactory.ReadLines(SmtpReplyReader caller, Boolean oneLine)
at System.Net.Mail.SmtpReplyReaderFactory.ReadLine(SmtpReplyReader caller)
at System.Net.Mail.SmtpConnection.GetConnection(ServicePoint servicePoint)
at System.Net.Mail.SmtpTransport.GetConnection(ServicePoint servicePoint)
at System.Net.Mail.SmtpClient.GetConnection()
at System.Net.Mail.SmtpClient.Send(MailMessage message)


as a fellow C# developer it seems that something is blocking. My firewall is off and I don't have an AV.
Weird!
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
see the picture attached.
And I tried: 587 too.
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
I can't unlink and link from CastleOS
I am trying Add device, I pair it in my sensor but the seconds continue to count and nothing happens.
The same with NWI and remove device.
From IMA tools (Aeon Labs tools), I can do it and it works.

Do I miss something?
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
That's weird.
It just shows me the temperature.
I think that I does something wrong.
How to use the Add, NWI and Remove buttons? Do I need to let it countdown till 0?

Thanks
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
I removed the device (perssing 3 times on the button in the sensor) and the light went ok. then, went to devices and it wasn't there (i let the countdown finish 60 seconds, it didn't finish before it lasted) and then I added the device and went to devices and I still see: Sensor Binary:13
what do I do?
Update: now it shows me only LUM, and still binary sensor.
And by the way, the email works smile
Bahhhh, what is going on!? Whaaaaa?
Thanks
edited by tal.winter@gmail.com on 2/23/2016
edited by tal.winter@gmail.com on 2/23/2016
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
It's not Multisensor 6. It's Fibaro Motion Sensor (which is multi sensor).
I hope that you didn't mean Multisensor 6 by Aeotec.
And I pressed 3 times. (which the manual says for inclusion and exclusion) smile
Update: it shows temp and lum.
Motion does detect and I get an email that a motion was captured.
But I can't create events for temperature changes or lum changes :/
Where do i see that a motion was detected?
Do you have logs?

Thanks
edited by tal.winter@gmail.com on 2/23/2016
2/23/2016
Topic:
Fibaro Motion Sensor

tal.winter@gmail.com
tal.winter@gmail.com
Chris Cicchitelli wrote:
Hmm... In the Aeon tools you have, do they give a list of command classes that the device reports it supports? Can you post them here? Unfortuantely Fibaro doesn't publish that in their documentation...



This is their manual:
http://www.fibaro.com/manuals/en/Motion-Sensor/Motion-Sensor_EN_5.3.14.pdf
Except that, mmm, this is what I can do in Aeon Tools. Nothing much smile

You (or someone) told me a few weeks ago that you will release at that week an update to CastleOS to work with Fibaro sensor.
So, maybe you meanr Aeon Multisensor? smile
The parameters of the sensor in CastleOS doesn't look ok (I think) and then I changed from Fahrenheit to Celsius and it's the same
edited by tal.winter@gmail.com on 2/23/2016
2/27/2016
Topic:
Z-Wave Parameters

tal.winter@gmail.com
tal.winter@gmail.com
You'll have or you have?
I couldn't fine one smile

Thanks
2/27/2016
Topic:
Wakeup interval

tal.winter@gmail.com
tal.winter@gmail.com
Hello.
Does the interval for wake up value supposed to be in seconds? miliseconds?

Thanks
2/27/2016
Topic:
Wakeup interval

tal.winter@gmail.com
tal.winter@gmail.com
smile
I am asking that because I tried both 5 minutes or 300 seconds.
Still, no changes in the values.
When I change the value the screen post back after a second or so like it didn't do anything (and there was no message saying: interval changed).
I look at the log, and nothing in there.
By the way, when I get the login screen again, I press on login and then it post back and then I press on login again and it enters.
Weird :O
2/27/2016
Topic:
Wakeup interval

tal.winter@gmail.com
tal.winter@gmail.com
I do use admin, I will check it out.
And crap, I changed it to 300, I will change it to 5 minutes NOW Big Grin
We'll be updating here.

Thanks
2/27/2016
Topic:
Wakeup interval

tal.winter@gmail.com
tal.winter@gmail.com
Ha. Ok. Good to know.
Sorry for asking too much questions.
I actually going to spend some money and use Z-Wave devices in my house.
I thought about a controller but and as it seems for me now, CastleOS is the way to do it smile
2/27/2016
Topic:
Wakeup interval

tal.winter@gmail.com
tal.winter@gmail.com
Great.
Maybe I will buy the controller after all my tests smile
Is there a roadmap for devices compatibility?
I mean, right now there are not so many devices compatible and I can see that there are a lot of devices compatibility in physical controllers.