7/4/2016
Topic:
CastleOS Kinect Service Command Threshold
Hein Hammervold
|
I have a machine running only the Kinect Service. When I do voice commands it only executes commands over 0.9x (don't know the exact value) even though the threshold is set lower in the configurator. Any ideas? Running version 1.3.1048.0.
PS: there is a misspelling in "Command Threshold" in the configurator.
-Hein |
7/4/2016
Topic:
Kinect 2
Hein Hammervold
|
I understand your frustrations, but give them some slack. I believe they are on hard work with the 2.0 release. |
7/5/2016
Topic:
CastleOS Kinect Service Command Threshold
Hein Hammervold
|
I edited the configuration.xml manually, and that seemed to work.
-Hein |
12/12/2016
Topic:
Z-Wave door sensor doesn't change status
Hein Hammervold
|
I have a fibaro and a sensative Z-wave door sensor. Both got discovered as a "other" device. I've set them as a door sensor-type and I can set configuration values and the configuration changes gets picked up. The problem is that they never seem to update the status. They are always seen as Open. I've set the value and parameter as 02 and 00 as per the manual, but still nothing. My controller is a Aeotec Z-Stick Gen 5 and running CastleOS 1.3.3118.
Any ideas? |
12/13/2016
Topic:
Z-Wave door sensor doesn't change status
Hein Hammervold
|
Hi Chris,
The Fibaro sensor is a FGK-101 (http://www.fibaro.com/en/the-fibaro-system/door-window-sensor). I'm uncertain of the Sensative sensor version (I'm not home right now), but it's this kind: http://www.sensative.com/strips.html.
Thanks, Hein |
12/17/2016
Topic:
Z-Wave door sensor doesn't change status
Hein Hammervold
|
Did you get to check this out? I don't know where to start troubleshooting this. Are there any logs to see what is being broadcasted from the Z-wave devices? -Hein |
1/11/2017
Topic:
Z-Wave door sensor doesn't change status
Hein Hammervold
|
Thanks Chris. New version fixed the issue! |
2/22/2017
Topic:
License key problems
Hein Hammervold
|
Hi, Everytime I reboot my computer, I have to re-enter the license key. CastleOS resets back to an unlicensed state. It doesn't happen if I only restart the service. Running v.1.3.3170, but it has happened on earlier versions as well.
-Hein |
2/27/2017
Topic:
License key problems
Hein Hammervold
|
Hi Chris, I only have the standard Windowd Defender (and excluded the CastleOS folders under Program Files(x86) and ProgramData). I can try disabling real time protection if you think it will make any difference.
-Hein |
3/8/2017
Topic:
License key problems
Hein Hammervold
|
Hi Chris, Thank you for the follow-up. I've disabled Windows Defender, and it seems to have done the trick! Seems the exclusions wasn't enough.
Thanks again, Hein |
8/17/2017
Topic:
Is Castle OS still actively developed?
Hein Hammervold
|
Hi Chris, Can you give any update on this? There doesn't seem to be any new releases of late (latest build date is 2/8/2017). |